Poly Zinc+ – Prevest DenPro

• Zinc Polycarboxylate based multipurpose cement
• Low film thickness with high adhesive strength
• Minimal solubility in oral fluids

• Suitable for cementation of: Crowns, bridges and orthodontic brackets
• Cavity lining under all restoration materials
• Temporary fillings and fillings of deciduous teeth

• Chemically bonds to tooth structure and metal appliances
• Extremely low film thickness
• Radiopaque
• High adhesive strength
• Minimal solubility in oral fluids

Shake Powder bottle before use: Dispense 2 spoons full of powder and 3-4 drops of liquid on a glass mixing slab or mixing pad. Thoroughly rinse the tooth surface with water and gently air dry. Mix powder and liquid for45- 60secs to a smooth paste. Thinly apply Poly Zinc+ over the tooth structure and the interfacing metal surfaces before they are joined. For maximum bond strength Poly Zinc + must be allowed to set 2:00 to2:15(min-sec) while metal and prepared tooth surfaces are compressed together. For this it is advised that the patient bites hard onto a cotton ball without periodic relaxation. Biting hard will remove excess cement and reduce its film thickness and improve the bond.

Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally Contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician. It should not be used with patients who have a history of severe allergic reaction to any of the components.

Direct or indirect pulp-capping.

After dispensing, replace the caps of the powder jar and liquid bottle. Store both in a cool and dark place.

After dispensing, replace the caps of the powder jar and liquid bottle. Store both in a cool and dark place.

3 years from the date of manufacturing.

• 1 x 30g Powder Jar,
• 1 x 15ml Liquid Bottle,
• 1 x Spoon,
• 1 x Mixing Pad,
• 1 x Instruction Manual