Isolate – Prevest DenPro

• Cold Mould seal, an excellent tin foil substitute to be used as separating media between stone & acrylic
• Uniform thickness permits closer adaptation

• For painting the plaster of the muffle before pressing the meth-acrylate resins.
• Isolating film to prevent the resin from sticking to the plaster.

• Prevents denture from sticking to stone during acrylic processing.
• Uniform film thickness permits closer adaptation of acrylic resin to model.
• Prevents distortion in fitting of acrylic resin Pink Color Emulsion.

The material is applied in 2 coatings. The first coating is applied uniformly in one direction with the paint brush or cotton as suitable, and allowed to dry. The second coating is applied over the first coating and allowed to dry. Further the acrylic processing can be completed. The dispensed material shall not be placed back in container and the dose once applied and used shall not be reused.

• Avoid prolonged exposure to eyes, skin, ingestion or inhalation.
• Do not swallow or take internally. If accidental swallowing occurs, drink plenty amount of water and seek medical attention.
• In case of contact with eyes or skin, flush with enough amount of water. If irritation persists, seek medical attention.

• Use the product as per indication for use mentioned in the IFU.
• Ensure the material is not heated when applied.

Do not use or apply in patients mouth. It is only for extraoral use.

Keep the bottle in cool and dry place maintained at temperature 10 C(50 F) -24 C(75 F). After use tightly screw cap the bottle.

3 years from the date of manufacturing.

• 450 ml bottle.
• 1 ltr bottle.
• 5 ltr bottle.