Fusion Flo Kit – Prevest DenPro

• Flowable composite with high strength & wear resistance
• Optimum Flowability to reach into difficult areas
• Good surface affinity for better handling

• Filling of smaller cavities
• Extended fissure sealing
• Restoration class III to V
• Repairs of fillings & veneers

• Optimal flowability
• Higher filler loading
• Excellent physical properties
• Lower polymerisation shrinkage
• Very good abrasion resistance

Apply the material with applicator tip directly in the cavity and pre contour with a suitable instrument. The layer should not be thicker than 2mm. Light cure for 40 sec using standard curing light. The dispensed material shall not be placed back in container and the dose once applied and used shall not be reused.

Avoid prolonged or repeated contact with skin (allergic contact dermatitis), and eyes. Avoid prolonged inhalation. Do not take internally. Contact with the skin may cause irritation, burns of hypersensitivity. If contact with skin occurs immediately wipe off thoroughly with cotton and alcohol and then wash well with soap and water. If skin rash and sensitization or other allergic reaction occurs discontinue use and seek medical attention. If the product comes into contact with the eyes, rinse thoroughly with fresh water and consult a physician.

Eugenol containing materials should not be used with this product because they may effect polymerization and interfere with the hardening process. Being sensitive to heat and light, the syringes should be kept away from direct sun light.

It is contraindicated for use with patients who have a history of severe allergic reaction to methacrylate resins.

Store at temperature between 10°C(50°F) to 24°C(75°F). Close the cap carefully after use. Keep away from moisture. Shelf life not affected after opening if stored in a cool dry place.

3 years from the date of manufacturing.

• Combo Kit : 4 x 2g Syringes (A2, A3, B2, B3), 20 x Applicator Tips, 1 Instruction Manual